Skip to content

Display Functionalities

Accessible from the Display:

On-Screen Installation Wizard
  • Guided setup process directly on the display
  • Helps the user through the initial printer setup
  • Choose the specific printer model for accurate configuration
  • Installs Wi-Fi modules as part of the setup flow
  • Flashes Klipper to the required sub-systems
  • Designed to get the printer ready to use with minimal manual intervention
Language Settings
  • Change the interface language
  • Supported languages include English, French, German, Italian, Portuguese, Spanish, and Russian
Display and System Settings
  • Adjust screen brightness and dimmed brightness
  • Set screen dim delay timing
  • Set screen saver delay timing
  • The display can first dim and later turn fully off based on user-defined timings
  • Display state (on/dimmed/off) can be synchronized with the case light
  • Enable or disable the buzzer sound
High Quality and Lightning-Fast Thumbnail Transmission
  • Fast thumbnail transfer for near-instant print preview in the file explorer (~30 ms)
  • Non blocking - browser fast through all your files with no "forced break" - life is too short for that ;)
  • "Transparent thumbnails background" for nicer looks - no white background. You deserve better!
Temperature Control
  • Set and monitor extruder temperature
  • Set and monitor bed temperature
  • Set and monitor chamber temperature
  • Quick toggle control for nozzle, bed, and chamber heaters
Fan and Light Control
  • Set and monitor part fan speed
  • Set and monitor filter fan speed (if available on your printer)
  • Set and monitor side fan speed (if available on your printer)
  • Quick toggle control for part fan, filter fan, and side fan
  • Control case light (on/off/dim)
  • Synchronize the case light with display dimming and screen saver behavior
Printer Movement and Positioning
  • Home all axes, or individually home X, Y, and Z axes
  • Move the toolhead manually
  • View current printhead position
Filament Management
  • Extrude or retract filament
  • Use load and unload filament macros
  • Enable or disable the filament sensor
  • View filament status during a print job
Custom On-Screen Macros
  • Configure up to 4 custom macros (names and functions can be user-defined)
  • Default presets are preheat macros for PLA, ABS/ASA, PETG, and TPU
  • Rename each macro to match your preferred workflow
  • Customize each macro's behavior based on your own needs
Print Management
  • Browse all saved G-code files and start print jobs
  • Browse files and folders in multiple directory levels
  • Support for USB sticks with nested subfolders through the file explorer
  • Sort files in the explorer, with default sorting by newest first or alternatively alphabetically
  • Fast thumbnail transfer for near-instant print preview in the file explorer (~30 ms)
  • Pause, resume, or stop a print job
  • Adjust Z-height (babystepping) during printing
  • Adjust flow during printing
  • Adjust speed during printing
Print Job Status
  • Display current layer and total layer count
  • Show filament status
  • Show remaining print time
  • Show elapsed print time
  • Display print preview thumbnail
  • Display file name of the active print
  • Show live temperatures for nozzle, bed, and chamber
  • Show live fan speeds for part fan, filter fan, and side fan
  • Show current flow setting
  • Show current speed setting
System Management
  • Restart Klipper
  • Restart firmware
  • Restart the system
  • Shut down the system
Calibration and Tuning
  • Coarse Z-offset calibration
  • Z-offset fine tuning using babystepping on a live print
  • Input shaping
  • Automated input shaping with the ability to save values and restart
  • Bed meshing for optimal first-layer adhesion
  • Automated bed meshing with saving mesh data and system restart
  • Static Mesh: create and use a static bed mesh when the probe is unreliable or when adaptive meshing should be skipped to save time
System Status and Diagnostics
  • Receive error messages and notifications, such as when the connection to Klippy is lost
  • Access options to reconnect, restart, or shut down from a dedicated menu
  • One-line terminal output on "prinjob screen" for debugging and deeper inspection
  • Especially useful for users running Beacon, Cartographer, Eddy, or other advanced probes
Network and Connectivity
  • Manage Wi-Fi network settings